mostm
/
openwrt-xray
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
openwrt-xray/README.md

1.2 KiB
Raw Permalink Blame History

openwrt-xray

Requirements

  • OpenWRT 22.03 and higher
  • Router should be in 192.168.0.0/16 subnet (default rules operate on that)

Install

  1. Drop the files onto OpenWRT (22.03 and higher) router
  2. Run install_xray.sh: chmod +x /root/install_xray.sh && /root/install_xray.sh
  3. Configure this installation:
  • In /etc/xray/config/outbounds.jsonc add your connection details (but be carefult with specified streamSettings->sockOpt, these are required)
  • You can optionally add excluding/blocking rules to /etc/xray/custom_rules.sh, see possible additions in fwd_functions.sh beside it.
  1. Enable the xray service in LuCI (System -> Startup, it should be at the end of the list) and reboot your router.

(In case it fails to work, you may disable the service and reboot the router again to revert the effects, or use /etc/xray/revert.sh)

crontab

I've added these in my crontab for more stable work of router:

0 20 * * 0 /sbin/reboot # Reboots device at 1:00 AM UTC+5 every week
59 19 * * * /bin/bash /root/restart_xray.sh # Restarts Xray at 0:59 AM UTC+5 every day
0 * * * * /usr/sbin/logrotate -s /usr/share/logrotate/status /etc/logrotate.conf # Run logrotate every hour